Strong Bitter Recipe - Autumn Bolter

Recipe Info

Recipe Image

Autumn Bolter

by on
All Grain
25 Liter(s)
36 Liter(s)
100 min
75%
All Grain Strong Bitter homebrew recipe. This homebrew recipe uses the following ingredients: Pale 2-Row - UK, Challenger Hops, Mandarina Bavaria Hops, Golding Hops, Wyeast Thames Valley Ale 1275 Homebrew Yeast, Irish Moss, Gypsum, Yeast Nutrient.

This recipe was cloned from Autumn Bolter.

Fermentables

100% - Pale 2-Row - UK
5.45
36
2
Mash

Hops

Challenger
50
Leaf
Boil
100 min(s)
8.5
42.7
Mandarina Bavaria
20
Leaf
Boil
100 min(s)
6.4
12.9
Golding
15
Leaf
Boil
10 min(s)
4.5
2.3
Mandarina Bavaria
20
Leaf
Boil
10 min(s)
6.4
4.3

Yeast

Wyeast Thames Valley Ale 1275
77%

Other Stuff

Irish Moss
3
ml
Boil
Gypsum
3
ml
Boil
Yeast Nutrient
3
ml
Boil

Mash Steps

No mash steps in this recipe

Special Instructions

1.
3 nights before - prepare yeast primer
2.
18.2 litres as strike water into Grainfather heat to 66?C
3.
add 5.45kg pale crushed malt to strike water in stages, stir in carefully
4.
Also add 120g rice husks - this is to help prevent a stuck mash at sparging which happened last time (painful experience)
5.
Leave malt in at 66?C for mash period of 80 mins and Mash Out of 10 mins
6.
During mash period prepare 17.3 litres sparge water at 80-85?C
7.
During mash period prepare bittering hops for adding to boil 50g Challenger and 20g Mandarina Bavaria, also 5g calcium sulphate
8.
At end of mash, lift out malted grains and sparge slowly with 15 litres sparge water
9.
Add the bittering hops and calcium sulphate and boil for 100 mins
10.
During the boil prepare aroma hops 15g Goldings and 20g Mandarina Bavaria, also protofloc\Irish moss
11.
At 90 mins boil time add aroma hops and protofloc\Irish moss, also 0.5 tsp Wyeast Yeast Nutrient dissolved in warm water
12.
At end of boil (100 mins), switch off boiler and prepare post boil (late) hops - 15g EK Goldings
13.
Check pH of wort - should ideally be close to 5.3
14.
At 80?C drop in late hops and leave for 20 to 30 mins
15.
Vigourously aerate wort 5-10 mins with specialised paddle attached to electric drill for fermentation stage
16.
Prepare and hook up counterflow chiller and syphon wort slowly into conical fermenter, allow for splashing to aid aeration
17.
Use a thermometer to gauge temperature - should be around 20-25?C
18.
Take a hydrometer reading of the wort and store the result - 1.054
19.
Top up wort with cold water to desired batch size level (25l) if necessary
20.
Add primed yeast mixture and stir in carefully
21.
Primary fermentation at 18-25?C (22?C optimum) until fermentation stops or specific gravity is static for 24 hours (Hydrometer readings)
22.
Secondary fermentation stage (Cask conditioning) - add 50g malt primings in 250ml water to conical fermenter - avoid aeration
23.
After secondary fermentation, remove trub and transfer to plastic cask for further conditioning (10 Days)

Tasting Notes (0)

There aren't any tasting notes logged yet

Recipe Facts

Autumn Bolter
Strong Bitter
  • 25.00 Gallons Liters Batch Size
  • 36.00 Gallons Liters Boil Size
  • 100  min Boil Time
  • 1.049 OG
  • 1.011 FG
  • 62.1 IBU (tinseth) Bitterness
  • 1.26 BG:GU
  • 3.6° SRM Color
  • 75% Efficiency
  • 4.9% ABV Alcohol
  • 163 per 12oz Calories
Clone This Recipe

Similar Homebrew Recipes

Clone Of Black Sheep ESB

Strong Bitter
by Brewer 133464 11/10/2024 12:45:56 PM

Brownings ESB

Strong Bitter
by curtw 11/4/2024 12:38:40 PM

Strong Bitter

Strong Bitter
by Brewer 127611 11/1/2024 9:36:15 AM

Fullers 1845 V2

Strong Bitter
by DaveRussell 11/1/2024 3:38:17 AM
© 2024 by brewgr.com. All Rights Reserved.